COMFORT FOAM
ENERGY SAVINGS FOR YOUR HOME

Comfort Foam provides a complete, seamless building envelope, creating a more comfortable indoor environment for the life of your home.

COMFORT FOAM completely and efficiently insulates and seals around penetrations through the building framework, such as electrical outlets and plumbing fixtures.

Top and bottom sill plates, energy heels and rim joists are sealed, along with other gaps normally found in residential construction.

COMFORT FOAM seals cracks, crevices and seams around the perimeter of your home, giving you added protection from unwanted air drafts and damaging moisture.

Proven more effective than conventional insulation products, COMFORT FOAM brand spray insulation forms a seamless bond with building components to create a structurally sound, uniform, air-infiltration barrier. Its superior thermal properties perform in even the most extreme hot or cold climates.

You save energy dollars year after year because the COMFORT FOAM insulation system delivers exceptionally good R-value for the life of the building. Less heating or cooling is needed to control the temperature in your home. That’s good for your budget and the environment!

Comfort Foam creates a protective thermal envelope around your living space.

It provides your home a fully sealed, seamless barrier against wind- and solar-driven moisture and unwanted air.

The Highest R-value in the Market

Insulation is rated in terms of thermal resistance - R-value - which indicates the resistance to heat flow. The higher the R-value, the greater the insulating effectiveness. COMFORT FOAM has the highest R-value (7 per in.) of all readily available, cost-effective insulations available in the market today.

Reduces or Eliminates Convection Looping.

Temperature differences between the unconditioned outside air and the conditioned living space can create convective looping (warm air rising, cold air falling) within a stud cavity. The impact of this looping degrades the R-value of most common forms of insulation and causes additional load on your home’s heating and cooling system. The superior R-value (7 per in.) and unique sealing characteristics of COMFORT FOAM reduce this temperature variance and the effect of convective looping, saving you energy dollars.

Meets Building Code Requirements.

Don’t worry about durability. COMFORT FOAM is approved by all three national building codes and will perform for the life of your building. Its exceptional thermal and structural characteristics will save you, and generations to come, from the problems associated with the high cost of energy.

Creates a Healthy Living Space.

COMFORT FOAM spray polyurethane effectively protects your living space form unwanted moisture build-up and condensation caused by warm moist air meeting cool dry air within the building envelope (stud cavities, attics). Installed by a Qualified COMFORT FOAM Contractor, COMFORT FOAM effectively seals your home against unwanted moisture. You can now use modern ventilation techniques to create the best, most habitable indoor living space—free of excess moisture and airborne pathogens—for a healthy, more comfortable home.

“Spray polyurethane foam insulation can be applied to a home under construction and will not only insulate, but will also reduce air leakage in the building envelope.”
                  US Department of Energy Insulation Fact Sheet, August 1997

Spray polyurethane foam alone “…can provide an air- and water-tight barrier.”
                  US Department of Commerce brochure, NISTIR4821

Controlling Air Infiltration…

The answer to America’s home energy-saving challenge.

United States Government energy labs estimate that air infiltration wastes up to 40% of every home heating and cooling dollar. It is one of the country’s most critical home energy problems. Unfortunately, most residential buildings were constructed before the scope of the problem was widely known. But today, new homes are being built utilizing the COMFORT FOAM solution, right from the start.

The latest money-saving technology for new home construction.

Used commercially for over 30 years, COMFORT FOAM is a sprayed-in-place polyurethane insulation, applied by a Qualified COMFORT FOAM Contractor during construction of your home. The closed-cell nature of COMFORT FOAM stops air leakage problems at the source.

A home that has good insulation plus air infiltration control…

• reduces the usage of fossil fuels for energy

• reduces the CO2 emissions that are damaging the environment, AND

• saves the homeowner money.

Save money. Help save the environment.

Air infiltration is caused by leaks around windows and doors, and by the spaces, joints, voids and cracks hidden inside the structure of your home. This unwanted air penetrates the building shell and travel inside walls and ceilings, under baseboards, and along hidden pathways in the plumbing and electrical system. Even the best-built houses have seams and gaps that permit air infiltration.

This uncontrolled air disrupts the temperature, air pressure and humidity of the living space, in any weather. The heating and cooling system has to work harder to maintain your family’s comfort. Energy is wasted and that causes higher utility bills.

The Bottom Line.

Unlike other home insulations, the spray-applied seamless sealing quality of COMFORT FOAM brand polyurethane foam insulation system eliminates the air infiltration problem.

In Conventional Residential Construction…

Once your house is finished, unwanted gaps and air spaces in the building structure are hidden. But they’re there, causing drafts, moisture and higher energy use.

COMFORT FOAM seals the gaps and spaces right from the start, while your house is being built.

For more information about Dallas/FT. Worth Urethane, Inc. and our products and services, please feel free to contact us anytime at Office Phone: 972-222-8462 or 817-654-0510. For email inquiries, please write to